High Quality Textile Chemical Polyaluminium chloride PAC Surfactant For Water Treatment

High Quality Textile Chemical Polyaluminium Chloride
  • Seller Anqing Haida Chemicals Co., Ltd.
  • Min. Order 1 Metric Ton/Metric Tons
  • FOB Price US $176.56-360.31 /Metric Ton

Item Details

Port: Tianjin
Supply Ability: 1000 Ton/Tons per Month
Payment Terms: L/C,T/T

Product Description

High Quality Textile Chemical Polyaluminium chloride PAC Surfactant For Water Treatment

Product Description

product description
Polyaluminium chloride is a new water purification material, inorganic polymer coagulant, and is also referred to as poly aluminum, which is the role of hydroxide ions bridging and polyvalent anion polymerization and the production of molecular weight , High charge of inorganic high molecular water treatment agent.
Poly aluminum chloride is golden yellow, khaki, brown, red granular / flaky, purified water quality is better than aluminum sulfate coagulant, the cost of water with the low 15-30%, floc formation of fast, Speed, than the traditional products such as aluminum sulfate processing capacity, it consumes water alkalinity is lower than a variety of inorganic coagulants, which may not cast or less cast alkali agent, to adapt to the source water PH range of 5.0 - 9.0, the corrosion Small, good operating conditions, solubility is better than aluminum sulfate, the source water temperature is better than the adaptability of aluminum sulfate and other inorganic coagulant.
Application areas
Products are widely used in life, production of water, domestic sewage, industrial wastewater purification, low temperature and low water purification, paper, petrochemical, thermal power plant ash ash wastewater recycling, printing and dyeing, waste water to COD, BOD and SS decolorization purification.

Technical indicators

Indicator name

drinking water {a}

non-drinking water {two}

Alumina {AL2O3} content

28-30%

27-29%

Salinity%

40-90

40-90

PH (1% aqueous solution)

3.5---5.0

3.5-5.0

Water insoluble content

<1.0

<1.5

Arsenic As%

≤0.005

≤0.005

Cadmium Cd%

≤0.002

≤0.002

Mercury Hg%

≤0.00001

≤0.00001

Ammonia nitrogen N%

≤0.01

≤0.01

Six price Cr + 6%

≤0.005

≤0.005


Use and storage method
1. Mix the solid product with normal temperature water for 1 minute at about 1: 2.5 - 1: 3 (weight ratio) for about 30 minutes. After the drug is completely dissolved, add 30-40 times the dilution of water or dilute into liquid according to the required concentration (the greater the turbidity of the source water, the second dilution plus the more water).
2. Source water turbidity in the 100 - 500mg / L, the dosage of 5-10mg per thousand tons of water to vote for 5-10Kg. Before the best use of water quality characteristics of small test. Select the best value, and then use.
3. Product packaging for the lining of polyethylene bags of plastic woven bags, each bag weight 25Kg
Products should be stored in a cool, dry place, to prevent sun and rain.
Production Process


Contact Us

Recommended Products

High Quality Polyacrylamide Pam Msds Factory
US $1765.43-2942.38 /Metric Ton
Polycarboxylate Superplasticizer Monomer TPEG 2400
US $1000-1600 /Metric Ton
Top Sale Chloroauric Acid CAS NO
US $1-99 /Kilogram
High Purity Polyaluminum Chloride PAC 30
US $240-480 /Ton
MAPO Manufacturer 57 39 6 Bonding
US $290.0-290.0 /Kilogram
3 5mm 4 8mm White Activated
US $920.0-950.0 /Ton
HEDP 1 Hydroxy Ethylidene 1 1
US $1015.42-1035.42 /Metric Ton